DIN 40621 Bb.2-1952 不含有织物的B型绝缘软管.交货技术条件

作者:标准资料网 时间:2024-05-16 19:28:30   浏览:9343   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:InsulatingSleevesB(Non-fibrous);TechnicalConditionsofDelivery
【原文标准名称】:不含有织物的B型绝缘软管.交货技术条件
【标准号】:DIN40621Bb.2-1952
【标准状态】:作废
【国别】:
【发布日期】:
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:
【国际标准分类号】:
【页数】:
【正文语种】:


下载地址: 点击此处下载
Product Code:SAE J2547
Title:Alternate Construction Nonmetallic Air Brake System Tubing
Issuing Committee:Air Brake Tubing And Tube Ftg Committee
Scope: This SAE Standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems. Non-reinforced products are designated type A and reinforced products, type B. It is not intended to cover tubing for any portion of the system which operates below 驴40 掳C, above +93 掳C, above a maximum working gage pressure of 1.0 MPa, or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections, which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this document, SAE J1131, and SAE J2494-3 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies .
Rationale: This SAE Standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems. Non-reinforced products are designated type A and reinforced products, type B. It is not intended to cover tubing for any portion of the system which operates below 驴40 掳C, above +93 掳C, above a maximum working gage pressure of 1.0 MPa, or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections, which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this document, SAE J1131, and SAE J2494-3 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies .
基本信息
标准名称:鞋带扯断力试验方法
中标分类: 轻工、文化与生活用品 >> 服装、鞋、帽与其他缝制品 >> 鞋、靴
ICS分类: 服装工业 >> 帽子、服饰品、衣扣
替代情况:原标准号ZB/T Y75022-1990;被QB/T 2675-2004代替
发布日期:1999-04-21
实施日期:1999-04-21
首发日期:1900-01-01
作废日期:2005-06-01
出版日期:1900-01-01
页数:5页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 轻工 文化与生活用品 服装 鞋 帽与其他缝制品 鞋 靴 服装工业 帽子 服饰品 衣扣